Specials


Torrey Pines EchoTherm HS70 corrosion-resistant fully programmable digital stirring hot plates
TPHS70
Enquire about this item
Buy Torrey Pines EchoTherm HS70 corrosion-resistant fully programmable digital stirring hot plates in NZ.

EchoTherm™ Model HS70 Corrosion-Resistant Fully Programmable Digital Stirring Hot Plates are the most advanced and easy-to-use units available. They are designed with a purge port for infusing an inert gas, such as lab air, into the chassis of the unit. This positive pressure inside the chassis causes the gas to flow out of any openings and prevents corrosive gasses form entering the chassis, improving unit life greatly. In manual operation, simply select the parameter to be set and scroll to the value needed. The unit will do the rest. In the programmable mode, routines can be stored for instant recall and use. The stored routine will run automatically, without attention, and exactly the same time after time.

Programs can be simple or complex depending upon the need. Multiple temperatures, temperature ramp rates, stirring speeds and timed events can be stored. When run, the unit monitors the program to be sure it runs exactly as written. Complete walk-away automation.

HP in model number = hot plate
HS in model number = stirring hot plate

FEATURES:

  • 10-program memory stored in CMOS. No batteries required
  • Each program can be 10 steps, where each step includes a temperature, stirring speed, time and heating rate
  • Repeat any program 198 times automatically. Infinite repeats settable
  • Programmable and non-programmable operation
  • Platinum RTD temperature measurement for ±1% accuracy
  • 8 solid ceramic heater top for quick heating on a flat, white, chemically resistant surface
  • Settable to 450ÚC in 1Ú increments
  • Temperature ramping for exact heating and cooling rates
  • PID temperature control to 1°C on plate surface or solution with probe
  • Stir up to 2 liters of aqueous solutions from 1001500 rpm
  • Timer goes up to 99 hours, 59 minutes, 59 seconds with user settable Auto-Off
  • 6 ptfe probe provided
  • Electronic calibration stored in CMOS
  • RS232 interface for control or recording data on a computer
  • NTP pipe-to-pipe, ¼ purge gas fitting on rear of chassis
  • 12-month warranty
  • UL, CSA and CE compliant

View details