Opaque Liquids are impenetrable by light and are best measured using Directional 45/0° reflectance geometry. This is the geometry that most closely matches how the human eye 'sees' colour.

Translucent Liquids allow light to pass through, but only diffusely, so that objects on the other side cannot be clearly distinguished. Both reflective and transmittance measurement modes may work well depending on the translucency of the sample. 

Transparent Liquids allow light to pass through with little or no interruption or distortion so that objects on the other side can be clearly seen. These liquids can only be measured using transmission instrumentation.

- Petrochemical Colour Management

Petrochemicals include olefins such as ethylene and propylene, and aromatics including benzene, toluene, and xylene. Petrochemicals are the building blocks for a wide range of materials such as solvents, adhesives, plastics, resins, fibers, elastomers, lubricants and gels.

Petrochemicals can be transparent or translucent, and are preferably measured using a transmittance instrument. However if you also measure opaque samples, you may prefer to select an instrument that measures in both transmittance and reflectance mode.



of 1

HunterLab UltraScan VIS

HunterLab UltraScan VIS
HUNTERULTRASCANVIS

Diffuse d/8° sphere Geometry, Reflectance and Transmittance, 360-780 nm
Enquire about this item