Specials


Thermo Scientific FH 40 G Radiation Survey Meter
THERADIATION
Enquire about this item
Buy Thermo Scientific FH 40 G Radiation Survey Meter in NZ.

Thermo Scientific™ FH 40 G's integrated design represents a versatile, user-friendly, hand-held radiation measurement system. Designed for many different radiation protection applications.

Specifications for FH 40 G Multi-Purpose Survey Meter

Measurement Ranges: 10pR/h-99 R/h, 36 keV to 1.3MeV; Up to 10 R/h; Up to 1 Sv/h; 1 µR/h to 10 R/h; Up to 100mSv/h

Energy Range: FH 40 G: 36 keV to 1.3MeV; FH 40 G-L: 36 keV to 1.3MeV; FH 40 G-10: 30 keV to 4.4MeV; FH 40 GL-omega: 36 keV to 1.3MeV

Sensitivity: Starts at 30 keV

Dose Measuring Range: FH 40 G: 10 µR - 1000 R; FH 40 G-L, FH 40 GL-omega: 10 µR - 100 R; FH 40 G-10: 100nSv - 10 Sv

Measured Quantity: FH 40 G, FH 40 G-L, FH 40 GL-omega: Response (Roentgen) - R; FH 40 G-10: Ambient dose equivalent rate (H™(10)) - Sv

Dimensions: 195 x 73 x 42mm

Weight: 410g

The FH 40 G is a wide range digital survey meter, suitable for nearly all measurement tasks arising in radiation protection.

  • Rugged, waterproof and reliable with very simple operation
  • Versatile multipurpose meter and area monitor
  • For use with external detectors for portable and remote area monitoring applications (cable of up to 50m can be used)
  • Gamma meter with internal proportional counter tube
  • Internal detector and external probes of the FH 40 G are monitored simultaneously
  • No requirement for external probe or cable for gamma dose rate measurements
  • Upon connection of an external probe, the probe parameters are automatically read into the FH 40 G and the correct parameters are set
  • Separate alarms can be set by the user for both the internal and external detectors
  • Operational internal proportional detector and connected external detector
  • Serial infrared interface
  • Type tested by PTB (Germany) in Hx or H™(10)
  • Type tested for use by fire brigades
  • Calibrated in air kerma or in the new ICRU-units ambient dose equivalent
  • Simultaneous operation of internal and external detectors, both both dose rate and remote dose rate readings
  • Configuration and data read out via PC
  • Storage of up to 256 data records
  • Waterproof (IP 67) and shock resistant
  • ADF mode (Advanced Digital Filter)
  • Clear, backlit LCD display
  • Data logging
  • Internal diagnostics ensure proper functioning of the detector(s) and the electronics
  • Designed to record up to 256 data points containing measurement number, date, time and dose rate at the internal detector and external detector, status, and barcode information
  • All FH 40 G versions and external probes containing the -10 suffix are designed to meet the energy response behavior of the new SI-units ambient dose equivalent and ambient dose equivalent rate according to ICRU 39.