Specials


LAQUAtwin EC33 Pocket EC meter
HOR3999960127
Enquire about this item
Buy LAQUAtwin EC33 Pocket EC meter in NZ.

The only pocket meter that directly measures conductivity and total dissolved solids (TDS) in 0.12ml sample. No need for a beaker to calibrate your meter or measure a sample. Just place few drops of the standard or sample onto the sensor. This procedure saves you time and prevents wasting your precious sample.

  • Minimum sample volume: 0.12ml
  • Up to 3 calibration points
  • Conductivity, TDS, and temperature display
  • Auto range
  • Auto calibration
  • Auto standard recognition: 1413µS/cm, 12.88mS/cm, 111.8mS/cm
  • Auto temperature compensation: 2%/ºC fixed
  • Temperature calibration: 5 to 40.0 ºC
  • 4 Total dissolved solids curves: TDS Factor 0.4 to 1.0, EN 27888, 442, NaCl
  • Auto stable / auto hold measurement
  • Auto power off: 30 mins.
  • Low battery indicator
  • IP67 Rating dust & waterproof
  • Replaceable sensor
  • 400 Hours battery life: continuous use without backlight
  • Materials: ABS epoxy body & titanium coated with platinum black sensor
  • Display: custom (monochrome) LCD with backlight
  • Operating conditions: 5 to 40°C, 85% or less relative humidity
  • Warranty: 2 years - meter, 6 months - sensor
  • Packed in handy carrying case
  • Supplied with 1413µS/cm & 12.88mS/cm conductivity standards (14ml each), conditioning solution (4ml), 2 x CR2032 batteries, dropper, instruction and quick manuals